#Line powered desktop intercom systems how to#
#Line powered desktop intercom systems code#

Learn about Dial Codes and how to program them.See our 3CX Basic Training: Ring Groups video.The extension using intercom needs to have the “ Can Intercom ” option enabled in “ Users ” > “ Edit Extension ” > “ Rights ”.

#Line powered desktop intercom systems code#

if your paging dial code is *11, to make an intercom call to extension 100, dial: *11100.Ĭonfigure the intercom dial code in “ Settings ” > “ Dial codes ” > “ Paging ”. To call a user via the intercom function, add the paging / intercom prefix in front of the extension number, e.g. the called party can respond without picking up the handset. Intercom enables you to make an announcement to a single extension with two-way audio, i.e.

Define the target multicast address to send the audio stream to and then use the provisioning configuration method to configure the IP phone to listen to this address.

Paging Multicast - is suitable for large paging groups and requires phones supporting multicast, on the same local subnet as 3CX.

Paging - add the extensions to the page in the section “ Group members ”.

Virtual Extension Number – accept the default or specify an extension number.

Name – enter a name for the paging group.

To add a paging group from “ Ring Groups ”, click on “ Add Paging ” and enter these options: *11, and a phone that supports and is configured for intercom. Paging requires you to set the relevant dial code in “ Settings ” > “ Dial Codes ” > “Paging”, e.g. Paging is used to make a one-way announcement to a ring group via the phone speaker, without the called party picking up the handset. 📝 Note : Unlike a Call Queue, a Ring Group predetermines the available internal extensions and hunts for those, disregarding any extension(s) that become available during the ring cycle.

Set the action to perform if the call is not answered by the ring group from “ Destination if no answer ”.

This will cause high power dissipation in both amplifiers. If more than one station tries to talk at the same time, the outputs of the audio amplifiers will be connected together.

Add the “ Group Members ” extensions, moving them up or down to prioritize and a “ Direct Inbound Dialing (DID) ”. When the switch is depressed, the input to the amplifier comes from the speaker, and the output of the amplifier goes to the party line.

Ring all – ring all phones at the same time.

Prioritised Hunt – ring the first extension, then the second etc.

Select between the 2 options for the appropriate ring strategy:

Click “ Add Ring Group ” and define its options.

To add a ring group from the 3CX Management Console, select “ Ring Groups ” and: “Ring Groups” route calls concurrently to multiple phones via virtual extensions, whereas “Paging” is used to make announcements to groups of people, like a PA system. A wide variety of power line intercom system options are available to you, such as network, special features, and resolution.

Self-managed (Private cloud - On-premise) offers 59 power line intercom system products.